Loading
Braddan shower tray
Downloads
-
- Technical data - 16000JB
- Technical data - 16006JB
- Data sheet - 16012JB
- Technical data - 16013JB
- Technical data - 16022JB
- Technical data - 16028JB
- Technical data - 16039JB
- Data sheet - 16045JB
- Technical data - 16050JB
- Technical data - 16058JB
- Technical data - 16063JB
- Technical data - 16065JB
- Technical data - 16071JB
- Technical data - 16082PK
- Technical data - 16083PK
- Technical data - 16090PK
- Technical data - 16099JB
- Technical data - 16100PK
- Technical data - 16109PK
- Technical data - 16120PK
- Technical data - 16121PK
- Technical data - 16129PK
- Technical data - 16135PK
- Technical data - 16141PK
- Technical data - 16150PK
- Technical data - 16161PK
- Technical data - 16168PK
- Technical data - 16175PK
- Technical data - 16360JB
- Technical data - 16361PK
- Technical data - 16470JB
- Technical data - 16471PK
- Technical data - 16472JB
- Technical data - 16473PK
- Technical data - 16495JB
- Technical data - 16496PK
- Technical data - 16520JB
- Technical data - 16521PK
- Technical data - 16522JB
- Technical data - 16523PK
- Technical data - 16528JB
- Technical data - 16529PK
Getting started
-
Features :
- Material: SMC or GRP depending on dimensions (see technical sheets)
- RAL: white 9016
- Load: maximum 250kg
- Anti-slip in the mass (PN18)
- Can be cut to length on certain dimensions (see table). Cut-to-length kit included.
- Height: 40mm
- Threshold: 20mm
- Off-center drain: dia. 50mm
- Waste included (James Bonde - ref: 25412)
- Lifetime warranty
-
- Resistant thanks to its GRP or SMC design, it can withstand a load up to 254kg.
- Safe with structured surface, anti-slip in the mass (PN18)
- Can be recessed (0mm access), semi recessed (20mm access) or surface mounted (40mm access)
-
This product should be cleaned regularly as part of a routine maintenance program.
Always rinse the shower tray with warm water after each wash to remove insoluble products.
If you use hair dye, immediately rinse the shower tray with soap and water.
For routine cleaning, use warm soapy water or a mild detergent and a soft cloth to wash and rinse the shower area.
Never use abrasive cloths or aggressive cleaning products to clean the shower area.
Do not use industrial cleaners with abrasive or aggressive chemical properties, as this may affect the surface finish.
The surface of this shower tray must never come into direct contact with strong industrial acids or alkalis, organic solvents, caustic soda, nail lacquers or varnishes, bleaching agents or any other dry powder cleaning agent.
Do not use paint strippers or stain removers to remove stubborn stains.
If more thorough cleaning using household cleaning products is required, always test on a small area first.
-
LIFETIME WARRANTY
-
SUPER STRONG
-
EXTRA FLAT
-
ANTI-SLIP